FOAM TAPE, PREMIUM is a high-performance, self-adhesive insulation tape designed to prevent condensation on cold pipes and surfaces. Its closed cell construction insulates against heat loss and is great for a variety of application settings like copper, iron, tees, valves, fittings and more. This tapes safe operating temperature of -15°F to 160°F makes it versatile for almost any residential and most commercial situations. Foam Tape  is 2 inches wide, 1/8 inch thick and comes 30 feet to a roll in a case of 12 and has excellent paper release during the application process. 

Size: 2″ x 1/8″ x 30′

For best results and to ensure a long-lasting, secure bond:

• 1. Prepare the Surface: Ensure the pipe or fitting surface is clean, dry, and free of moisture, oil, or rust.
  2. Initial Wrap: Remove the release paper and begin spirally wrapping the tape around the piping.
  3. Optimal Overlap: For maximum efficiency and a continuous seal, wrap the tape with approximately 50% overlap.
  4. Do Not Stretch: Apply the tape by pressing it firmly into place, avoiding excessive stretching.
  5. Insulating Fittings: For complex surfaces like valves and tees, cut small sections of tape to press and mold into place until the metal is completely covered.
  6. Build Thickness: For areas with extreme conditions, apply additional layers of tape to reach the required insulation thickness.
  7. Final Securement: Press down firmly over the entire tape surface to ensure the pressure-sensitive adhesive has fully adhered.

DANGERS & PRECAUTIONS: